It's a freezing winter day and you awaken to a cold house. You quickly find that the heating unit isn't working! Your very first thought is to call for emergency heater repair work.
Before you get your phone, you can take a few basic steps to see if you may have the ability to deal with the concern by yourself. This may help remedy the issue quicker and without the cost of a possibly unneeded emergency heater repair call.
1. Examine your thermostat.
- Make certain that the thermostat is on and set to "heat." This sounds apparent, but you wouldn't think how many service calls take place due to the fact that the house owner didn't know that someone (like a guest or kid) changed the settings!
- If your thermostat has a fan setting, set it to "vehicle" instead of "on." Otherwise, the fan might blow constantly even when the furnace maintenance - furnace-repair-calgary.ca air isn't being warmed.
- If the space temperature is lower than the thermostat setting, attempt adjusting the establishing a few degrees to see if the furnace starts.
2. Make certain you have power to the heater.
Even if you have a gas furnace, a disturbance in electric power will disrupt your heating system from producing heat. You may have a circuit breaker that has actually tripped.
If that holds true, you can reset it by turning the circuit all the way off and after that on once again. If the circuit instantly breaks once again, call a professional.
3. Examine your air filter.
An air filter that is exceptionally clogged up will not permit the air to be heated up appropriately. It may trigger your heater to get too hot and close down.
Get rid of the filter and hold it against the light. Can't see any light through it? Change it. We advise examining your heating system filter on a monthly basis and replacing as required.
4. If you have a gas heating system, make certain the gas supply is on.
If you have actually had any repairs done recently, somebody might have shut off the gas supply valve and then forgot to turn it back on. Or, the gas business might have shut down the gas lines for maintenance. A quick consult the gas company is an excellent idea if you think this might be the case.
- Examine the gas valve at the gas business's meter.
- Inspect the gas valve on your heating system. Your heater's gas valve is on when the handle is inline (parallel) with the pipeline. If it's off, the deal with will be perpendicular to the pipe.
If you smell gas, turn off the supply and immediately call a professional.
5. Examine the ignition source or pilot burner.
Most modern-day heating systems have an igniter paired with a flame sensor instead of a physical pilot burner. Both of these can break and require repair work. In fact, ignitor and flame sensing unit issues are a few of the most typical heater repair work we encounter.
If you have an older heating system, your unit might have a physical pilot burner. A draft or disturbance in gas service can trigger the pilot light to go out. If your pilot burner is out, and you have actually currently verified that you have a safe gas supply, attempt relighting it according to your owner's manual. (This is usually done with a fireplace match or long barbeque-style lighter.).
If you're not comfortable with this, or the pilot light won't stay lit, call a technician.